Mean Well RCP series 19 inch power supply 1000W-1800W RCP-1000-12
RC0-1000-24 power system
Features :
- Complete rack mountable front end solution: rectifier and charger
- 1U low profile
- 19 inch rack shelf available
Wattage :
1000W~18000W
Model :
Power capacity:RCP-1000 /RCP-1600/RCP-2000
Charger:RCB-1600
Rack:RCP-1U /RHP-1U /RKP-1U
Controller & Monitor : RCP-MU /RKP-CMU1
Applications
- Industrial automation
- Distributed power architectural system
- Wireless /telecommunication solutions
- Redundant power system
- Electric vehicle charger system
- Constant current source system
Technical Sheet :
| MODEL | RCP-1000-12 | RCP-1000-24 | RCP-1000-48 |
OUTPUT | DC VOLTAGE | 12V | 24V | 48V |
| RATED CURRENT | 60A | 40A | 21A |
| CURRENT RANGE | 0 ~ 60A | 0 ~ 40A | 0 ~ 21A |
| RATED POWER | 720W | 960W | 1008W |
| RIPPLE & NOISE (max.) Note.2 | 150mVp-p | 200mVp-p | 300mVp-p |
| VOLTAGE ADJ. RANGE(SVR) | 11.6 ~ 12.4V | 23.2 ~ 24.8V | 46.3 ~ 49.7V |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | ±1.0% |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% |
| LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% |
| SETUP, RISE TIME | 1000ms, 60ms/230VAC at full load |
| HOLD UP TIME (Typ.) | 16ms/230VAC at full load |
INPUT | VOLTAGE RANGE Note.4 | 90 ~ 264VAC 127 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz |
| EFFICIENCY (Typ.) | 81% | 87% | 89% |
| AC CURRENT (Typ.) | 8.5A/115VAC 4.5A/230VAC | 10.5A/115VAC 5.5A/230VAC | 11A/115VAC 5.5A/230VAC |
| INRUSH CURRENT (Typ.) | COLD START 50A |
| LEAKAGE CURRENT | <1.1mA / 230VAC |
PROTECTION | OVERLOAD | 105 ~ 125% rated output power |
| Protection type : Constant current limiting, recovers automatically
after fault condition is removed |
| OVER VOLTAGE | 13.2 ~ 16.2V | 26.4 ~ 32.4V | 52.8 ~ 64.8V |
| Protection type : Shut down o/p voltage, re-power on to recover |
| OVER TEMPERATURE | Shut down o/p voltage, recovers automatically after temperature
goes down |
FUNCTION | AUXILIARY POWER | 5V @ 0.3A |
| REMOTE ON-OFF CONTROL | By electrical signal or dry contact ON:short OFF:open |
| REMOTE SENSE | Compensate voltage drop on the load wiring up to 0.5V |
| OUTPUT VOLTAGE PROGRAMMABLE | Adjustment of output voltage is allowable to 90 ~ 110% of nominal
output voltage. Please refer to the Function Manual. |
| DC OK SIGNAL | The isolated TTL signal out, Please refer to the Installation
Manual |
| AC OK SIGNAL | The isolated TTL signal out, Please refer to the Installation
Manual |
| OVER TEMP WARNING | Logic " High" for over temperature warning, Please refer to the
Installation Manual, isolated signal |
ENVIRONMENT | WORKING TEMP. | -20 ~ +60℃ (Refer to "Derating Curve") |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing |
| TEMP. COEFFICIENT | ±0.02%/℃ (0 ~ 50℃) |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
SAFETY & EMC (Note 5) | SAFETY STANDARDS | UL62368-1, CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, EAC TP TC
004 approved |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.7KVDC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH |
EMC EMISSION | Parameter | Standard | Test Level / Note |
| Conducted | BS EN/EN55032 (CISPR32) | Class B |
| Radiated | BS EN/EN55032 (CISPR32) | Class B |
| Harmonic Current | BS EN/EN61000-3-2 | ----- |
| Voltage Flicker | BS EN/EN61000-3-3 | ----- |
EMC IMMUNITY | BS EN/EN55024, BS EN/EN61000-6-2 |
| Parameter | Standard | Test Level / Note |
| ESD | BS EN/EN61000-4-2 | Level 3, 8KV air ; Level 2, 4KV contact |
| Radiated | BS EN/EN61000-4-3 | Level 3 |
| EFT / Burst | BS EN/EN61000-4-4 | Level 3 |
| Surge | BS EN/EN61000-4-5 | Level 4, 4KV/Line-Earth ; Level 3, 2KV/Line-Line |
| Conducted | BS EN/EN61000-4-6 | Level 3 |
| Magnetic Field | BS EN/EN61000-4-8 | Level 4 |
| Voltage Dips and Interruptions | BS EN/EN61000-4-11 | >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods |
OTHERS | MTBF | 840.8K hrs min. Telcordia SR-332 (Bellcore) ; 107.4K hrs min.
MIL-HDBK-217F (25℃) |
| DIMENSION | 295*127*41mm (L*W*H) |
| PACKING | 1.93Kg; 6pcs/12.6Kg/1.04CUFT |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC
input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12"
twisted pair-wire terminated with a 0.1uf & 47uf parallel
capacitor. 3. Tolerance : includes set up tolerance, line regulation and load
regulation. 4. Derating may be needed under low input voltages. Please check
the derating curve for more details. 5. The power supply is considered a component which will be
installed into a final equipment. All the EMC tests are been
executed by mounting the unit on a 720mm*360mm metal plate with 1mm of thickness. The final
equipment must be re-confirmed that it still meets EMC directives.
For guidance on how to perform these EMC tests, please refer to “EMI testing of component
power supplies.” (as available on http://www.meanwell.com) 6. The ambient temperature derating of 3.5℃/1000m with fanless
models and of 5℃/1000m with fan models for operating altitude
higher than 2000m(6500ft). ※ Product Liability Disclaimer:For detailed information, please
refer to https://www.meanwell.com/serviceDisclaimer.aspx |
Solutions
We provide a complete solutions including site survey, propose
professional plan according to customer’s request ,technical
support, and maintenance service for Telecommunication Companies in
and out of China. We have a competent team and a network of trusted
Partners around the world.
FAQ :
1. How do you control the quality?
A:All products before the shipment are simulated usage scenarios,
load and full load and current sharing test to ensure the quality
of the product.
2. What is your minimum order quantity?
A:There is no minimum order quantity, and one can also be done. The
only difference is the price and schedule.
3. Can you introduce your company?
A:I am very honored. I will send you the company’s introduction
document later to give you a more comprehensive and direct
introduction to our company’s information.
4. What are the advantages of your company?
A:Adequate inventory, and supply guarantee for the subsequent
renewal of supply, flexible provided according to different to
different needs of customers, providing different solutions.
5. Can i send samples?Report it to me along with the price?
A:You can send samples, the samples are subject to large pride, and
the freight needs to be borne by you.
6. How do your company deal with the problem on quality?
A:Our company has been doing this industry for almost 10 years. It
has already had a certain reputation. We will carefully analyze it.
If it is indeed our quality problem, you can rest assured that it
will do things according to the contract agreement and will never
let you have any after the worries, our service team will be happy
to serve you.
7 What about the quality ?
A:100% original with new package. we will test each item before
posted to make sure each item with good quality.
8 How many months for guarantee ?
A: 1 year quality guarantee
9 How to deal with any inferior -quality goods ?
A: Goods can be post by with our charge of post fee for any bad
quality products within guarantee time.
