Eltek Rectiverter-Indoor system Scalable 120 kW system with
optional A+B, AC input (CDEJ6042.xxxx)
The scalable Rectiverter indoor system provides backup power for
400 VAC 3-phase or 230 VAC 1-phase loads, and 48 VDC power for DC
loads and battery charging.
Rectiverter Scalable System 120 kW
The system has a maximum load capacity of 108 kW, which is
dynamically variable to provide AC outputs up to 90 kVA / 72kW and
also feed DC loads up to 72 kW with built in AC & DC distribution.
When used in combination with the optional B-input (dual AC input)
which eliminates the need for a traditional ATS (Automatic Transfer
Switch), the Rectiverter indoor system represents the ultimate in
flexibility and scalability.
Key features
400 VAC 3 phase (Y) input
400 VAC 3 phase (Y) output
48 VDC input/output
Max 90 kVA / 72 kW AC output
Max 72 kW DC output
AC Distribution
DC distribution option
A+B option (dual AC input)
LVBD option
Up to 4 battery strings
Built in transfer technology
150% overload capability, 15S
600% quick trip current 20 ms
Hot pluggable
Smartpack2 controller
Operates in paralell with Flatpack2 rectifiers
Global compliance
Patented HE technology
SINGLE LINE DIAGRAM 120 KW + 108 KW B-INPUT
Parameters :
|
| Models / ordering information |
| 120 kW + 108 kW B-input |
| Product family |
| CDEJ6042.xxxx |
| AC OUTPUT DATA |
| Voltage (default) / (adjustable range)1) |
| 400 VAC 3 phase (Y) / 346-415 VAC |
| Frequency (default inverter mode) |
| 50 Hz (adaptive) |
| Frequency (set-able inverter mode) |
| 50Hz, 60Hz or last synced 50/60Hz (adaptive) |
| Power maximum (continuous / overload (<15s) ) |
| 72 kW (90 kVA) / 120kVA |
| Current maximum/phase (continuous / overload (<15s) ) |
| 130 ARMS / 174 ARMS |
| Current (maximum) Quick trip/phase (20ms) |
| 640 A (6 x nominal) |
| Hold up (Voltage dips) (before switching to battery) |
| > 5 ms @ 72 kW load |
| THD |
| < 1.5 % at resistive load |
Output features | Module: Fuse in L and N , Hot pluggable 1 pole or 3 pole AC distribution (connection directly on MCB) Max breaker capacity according to recommended max breaker for
rectiverter module |
| DC OUTPUT DATA |
| Voltage (default) / (adjustable range) |
| 53.5 VDC / 43 - 58 VDC |
| Power (maximum @nominal input) |
| 72 kW 2) |
| Current (maximum @VOUT ≤ 48 VDC) |
| 1500 A 2) |
| Hold up time, maximum output power |
| >10ms; VOUT > 41 VDC |
| Output features |
| Short circuit proof, Over voltage Shutdown |
| INPUT DATA |
| AC Mains Input Voltage(3 phase Y) |
| 320-475 VAC, |
| AC Current/phase(at nominal output voltage) (depending on module
type) | 140-240 ARMS 4) |
| Frequency (default: sync range) |
| 47-53 & 57-63 Hz |
| Frequency (set-able: sync range) |
| 47-53 Hz, 57-63 Hz or both (adaptive) |
| Power Factor / THD |
| > 0.99 at 50% load or more / < 3.5% |
| DC Voltage nominal / extended range (no overload)3) |
| 45 - 58 VDC / 40 - 45 VDC |
| DC Current (maximum) |
| 1920 A / 2700 A during overload (15s) |
| Input features |
| Module : Fuse in L and N, Hot pluggable, Varistor, Hot pluggable AC input individual screw terminals 150 mm2 for L1-L3, N & PE |
| BATTERY BREAKER |
| 1-pole battery breaker | 2*TPS 2 holder (800-1600 A) | 4*TPS 00 holder (250-600 A) |
| OPTIONS |
| B-input maximum power (with FP2 HE, 2 kW rectifiers) |
| 72 kW |
| B-input maximum power (with FP2 HE, 3 kW rectifiers) |
| 108 kW |
| DC distribution (connection directly on breaker) |
| 1-125 A, 1 pole breaker (max 30 pc 18 mm, max 20 pc 27 mm) |
| LVBD (1-pole) |
| 1800 A |
| OTHER SPECIFICATION |
| Efficiency | >96% (mains mode (AC/AC and AC/DC)), >94% (inverter mode
(DC/AC)) |
| Protection Class | IP 20 |
|
|
| Operating temperature | -40 to +55°C (-40 to +131°F), humidity 5 - 95% RH non-condensing |
| Storage temperature | -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing |
| Dimensions[WxDxH] / Weight | 1200 x 600x 2000mm (23,7 x 23,7 x 78,8”) / 300 kg (1100 lbs) |
| DESIGN STANDARDS |
| Electrical safety | EN 60950-1, EN 62040-1 UPS safety |
|
| EMC | ETSI EN 300 386 V.1.6.1, FCC CFR 47 Part 15 EN 61000-6-1 /-2/-3/-4, EN62040-2 |
|
Environment | ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) Normal operating conditions to be as per IEC/EN 62040-3:2011 clause
4.1 RoHS (2011/65/EU) and WEEE (2002/96/EC) compliant |
1) Output voltage ranges configured in factory and have individual
keying in top chassis 3) 40 - 45 VDC: reduced performance - no power boost and increased
voltage THD on AC output. | 2) AC load has priority. Maximum available DC output power and current is dependent on instant AC load and AC input voltage; i.e maximum 48kW/1000 A at full AC
power and nominal input for 230VAC. 4) If DC voltage is pulled below 43V the input current may increase
above this level |
* The indoor Rectiverter Cabinet with AC &DC feed in one
cabinet
Related Products :
Solutions
For telecom enterprises at home and abroad, we provide a
comprehensive range of services. From on - site inspections to gain
a practical understanding of the situation, to the formulation of
professional plans based on customer demands, and then to the
resolution of technical issues and the regular maintenance of
equipment, we cover it all. With a highly qualified team and a
network of reliable partners worldwide, we guarantee the efficiency
and reliability of our services.
FAQ :
1.How do you supervise product quality?
A: We have a comprehensive quality control system in place. Before
products are shipped, they are tested in scenarios that replicate
real - world usage, including load, full - load, and current
sharing tests, to ensure that only high - quality products are
delivered.
2.Is there a minimum quantity for placing an order?
A: We don't impose a minimum order quantity. You can order just one
item or more. But please note that the order quantity will impact
both the price and the delivery time.
3.Can you introduce your company briefly?
A: Sure. I'll send you our company's detailed introduction document
soon. It will give you a complete picture of our company, including
our business scale, technical capabilities, and market position.
4.What are the competitive edges of your company?
A: Our company is known for its sufficient inventory, which ensures
a smooth supply for future orders. Also, we offer flexible
services, customizing solutions according to different customer
demands.
5.Can I ask for samples and get a price quotation?
A: Samples are available. The price of samples is the same as the
bulk price, and you will be responsible for the sample shipping
fee.
