MEAN WELL MOVING SIGN SERIES 150W- 400W Single Output with PFC
LSP-150 HSP-200 UHP-200A HSP-300
MEAN WELL MOVING SIGN SERIES 150W- 400W Single Output with PFC
LSP-150 HSP-200 UHP-200A HSP-300
Features:
Light weight and low profile
Suitable for high efficiency moving sign applications
Conformal coating (HSP, HDP, NEL, HSN series)
Semi-potted and design against rain splash (ERP Series)
Parametets :
| MODEL | LSP-160 -3.3 | LSP-160 -4.2 | LSP-160 -5 | LSP-160-12 | LSP-160-24 | LSP-160-36 | LSP-160-48 |
OUTPUT | DC VOLTAGE | 3.3V | 4.2V | 5V | 12V | 24V | 36V | 48V |
| RATED CURRENT | 32A | 32A | 32A | 13.5A | 6.75A | 4.5A | 3.4A |
| RATED POWER(convection) | 105.6W | 134.4W | 160W | 162W | 162W | 162W | 163.2W |
| RIPPLE & NOISE (max.) Note.2 | 200mVp-p | 200mVp-p | 200mVp-p | 240mVp-p | 240mVp-p | 240mVp-p | 300mVp-p |
| VOLTAGE ADJ. RANGE | 3.2~3.5V | 4~4.5V | 4.7~5.3V | 11.4~12.6V | 22.8~25.2V | 34.2~37.8V | 45.6~50.4V |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±2.0% | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.3% | ±0.3% |
| LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| SETUP, RISE TIME | 2000ms, 80ms/230VAC 3000ms, 80ms/115VAC at full load |
| HOLD UP TIME (Typ.) | 10ms/230VAC 10ms/115VAC |
INPUT | VOLTAGE RANGE Note.4 | 100 ~ 264VAC 141 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz |
| POWER FACTOR (Typ.) | PF≥0.94/230VAC PF≥0.98/115VAC at full load |
| EFFICIENCY (Typ.) | 87.5% | 88.5% | 89.5% | 92.5% | 93.5% | 93.5% | 93.5% |
| AC CURRENT (Typ.) | 2.2A/115VAC 1.1A/230VAC |
| INRUSH CURRENT (Typ.) | Cold start 45A/115VAC 85A/230VAC |
| LEAKAGE CURRENT | <0.75mA / 240VAC |
PROTECTION | SHORT CIRCUIT | Hiccup protection,recovers automatically after fault condition is
removed |
| OVERLOAD | 110~140% rated output power |
| Protection type : Constant current limiting,continous increase of
load will be hiccup protection, recovers automatically after fault
condition is removed |
OVER VOLTAGE | 3.8~ 4.6V | 4.62 ~ 5.46V | 5.75 ~ 6.75V | 13.2 ~ 15.6V | 26.4 ~ 31.2V | 39.6 ~46.8V | 52.8 ~ 62.4V |
| Protection type :Shut down O/P voltage,re-power on to recover |
| OVER TEMPERATURE | Shut down O/P voltage, re-power on to recover after temperature
goes down |
FUNCTION | CURRENT SHARING | Please refer to the Function Manual |
| DC OK SIGNAL | Contact rating(max.):15Vdc/10mA resistive load |
ENVIRONMENT | WORKING TEMP. | -30 ~ +70℃(Refer to “Derating Curve") |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing |
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH non-condensing |
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) |
| VIBRATION | 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes |
SAFETY & EMC (Note.6) | SAFETY STANDARDS | UL62368,TUV BS EN/EN62368, CCC GB4943, EAC TP TC 004, BSMI
CNS14336-1 approved, Design refer to BS EN/EN60335-1 |
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/ 70%RH |
| EMC EMISSION | Compliance to BS EN/EN55032,GB9254,Class B, BS EN/EN55014,BS
EN/EN61000-3-2,-3,EAC TP TC 020,BSMI CNS13438 |
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11;BS EN/EN61000-6-2 (BS
EN/EN50082-2), heavy industry level ,EAC TP TC 020 |
OTHERS | MTBF | 2092.7K hrs min. Telcordia TR/SR-332(Bellcore) ;282.7K hrs min.
MIL-HDBK-217F (25℃) |
| DIMENSION | 194*55*20mm (L*W*H) |
| PACKING | 0.356kg;30pcs/11.68kg/0.6CUFT |
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC
input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12"
twisted pair-wire terminated with a 0.1uf & 47uf parallel
capacitor. 3. Tolerance: includes set up tolerance, line regulation and load
regulation. 4. Derating may be needed under low input voltages. Please check
the derating curve for more details. 5. The ambient temperature derating of 5℃/1000m is needed for
operating altitude greater than 2000m(6500ft) 6. The power supply is considered a component which will be
installed into a final equipment. The final equipment must be
re-confirmed that it still meets EMC directives. For guidance on how to perform these
EMC tests, please refer to “EMI testing of component power
supplies.” (as available on http://www.meanwell.com) ※ Product Liability Disclaimer:For detailed information, please
refer to https://www.meanwell.com/serviceDisclaimer.aspx |
Solutions
We offer a complete solution for telecom companies across China and
beyond that is designed to exceed expectations. Our site survey is
a thorough process that leaves no stone unturned, ensuring that we
have a complete understanding of the customer's environment. Our
professional plan is customized to the customer's unique needs,
offering a competitive advantage in the market. Our technical
support is provided by a team of experts who are always available
to assist. Our maintenance services are regular and preventative,
reducing the risk of system failures. With a competent team and a
global network of trusted partners, we are committed to delivering
the highest level of service.
FAQ :
1.Q: Can I request samples and get a price quote?
A: Samples are available. They're priced at the bulk rate, and
you'll need to cover the shipping cost.
2.Q: How does your company handle quality issues?
A: With nearly a decade in the industry, we have a proven track
record. For any quality problems, we'll investigate thoroughly. If
it's our fault, we'll resolve it per the contract, backed by our
dedicated service team.
3.Q: How reliable are your products?
A: Our products are 100% original, newly packaged, and rigorously
tested before dispatch to ensure top - notch quality.
4.Q: What's the product warranty period?
A: Our products come with a 1 - year quality guarantee.
5.Q: What if I receive defective products?
A: For any substandard products within the warranty period, we'll
cover the return shipping and arrange for replacements.
