Eltek Rectifier Module Flatpack2 380/3000 380Vdc 3000W high
efficiency (part no. 241119.825)
Flatpack2 380V/3000W HE
The Flatpack2 380V/3000W HE rectifier has high efficiency, OR-ing
protection on output and high output power. Distribute pure battery
backup DC voltage with a minimum of loss. Remove the low
reliability DC-AC step in the central backup power system and
maximize its reliability and efficiency.
HE rectifier for 380 Vdc in data centers
Stack cabinets with up to 72 rectifiers to build large power
systems monitored by the Smartpack2 controller.
Key features
- Power density - 33 W/inches3
- High efficiency – 96.2%
- OR-ing protection on output
- Hot pluggable – MTTR 5 min
Parameters :
|
| Model | Flatpack2 380/3000 HE (UI) |
| Part number | 241119.825 |
| INPUT DATA |
| Voltage (nominal) | 176 - 277 VAC / 260 - 400 VD 1) C |
| Voltage (range) | 85 - 305 VAC / 260 - 410 VD 1) C |
| Frequency | 45 - 66 Hz / 15 - 18.5 Hz2) / DC1) |
| Current (maximum) @ nominal input, full load | 18.2 ARMS |
| Power Factor | > 0.99 at 50% load or more |
Protection | Fuse in L & N Varistor Disconnect when VIN is out of range |
| OUTPUT DATA |
| Voltage (default) | 381 VDC |
| Voltage (adjustable range) | 300 - 400 VDC |
| # Pb cell supported | 156 - 168 3) |
| Power continuous (maximum) | 3000 W |
| Power @ 85 VAC / 85 VDC | 1200 W |
| Current continuous (maximum) | 9 A (@VOUT < 336 VDC) / 7.9 A (@ VOUT = 381 VDC) |
| Current sharing (10 - 100% load) | ±5% of maximum current from 10 to 100% load |
| Static Voltage regulation (10 - 100% load) | ±0.5% |
| Dynamic Voltage regulation | ±2.0% for 10-90% or 90-10% load variation, regulation time < 10
ms 5) |
| Hold up time | > 20 ms; output voltage > 300 VDC at 1500 W load |
| Ripple | < 1000 mVP-P , 30 MHz bandwidth |
| Protection | Overvoltage shutdown, Hot plug-in - Inrush current limiting, ORing
diode, Fuse5), Short circuit proof, High temperature protection, Overload
shutdown4) |
| OTHER SPECIFICATIONS |
| Efficiency @ 230 VAC / 380VDC input | 96.2% / 96.6% |
| Isolation | 3.0 kVAC – input to output, 1.5 kVAC – input to earth, 1.5 kVDC – output to earth, 3.0 kVAC – CAN to primary, 3.0 kVAC – CAN to secondary |
| Alarms (Red LED) | Low mains shutdown, High and low temperature shutdown, Rectifier
Failure, Overvoltage shutdown on output, Fan failure, Low voltage
alarm, CAN bus failure |
| Warnings (Yellow LED) | Rectifier in power derate mode, Remote battery current limit
activated, Input voltage out of range, flashing at overvoltage |
| Normal (Green LED) | Input and output ok |
| Acoustic noise, at nominal input and full load | < 40dBA @Tambient< 25°C / <58dBA @ Tambient> 40°C |
| MTBF (Telcordia SR-232 Iss.3 Meth. II Case L1) | 2 291 210h (@ Tambient = 25 °C) |
| Operating temperature | -40 to +75°C (-40 to +167°F), humidity 5 - 95% RH non-condensing Output power de-rates linear from 3000W @ 50°C (122°F) to 980W @
75°C(167°F) |
| Storage temperature | -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing |
| Dimensions[WxHxD] / Weight | 109 x 41.5 x 327 mm (4.25 x 1.69 x 13”) / < 1.95 kg (4.3 lbs) |
| DESIGN STANDARDS |
| Electrical safety | EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC
60950-1:2013, UL 60950-1:2014, CSA C22.2 No. 60950-1-07 |
| EMC | EN 61000-6-1:2007, -6-2:2005, -6-3:2007 + A1:2010, -6-4:2007 +
A1:2010, IEC61000-6-5: 2015, EN 300 386:v1.6.1, FCC CFR 47 Part 15:2013 |
Environment | Tested according to: ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class
2.3) Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2.
Other operating conditions as per IEC 62040-5-3:2016 clause 4.3,
must be advised 2011/65/EU (RoHS) & 2012/19/EU (WEEE) |
1) DC input support from revision 7 phased in via pn 241119.825IA.
Support for lower DC voltages on request 2) 16 2/3 Hz frequency range only supported for 230 VAC +/-15%. Max available power de-rated to 1000 W 3) for 156 cells minimum test voltage is 1.923 V/cell. For 168 cell
maximum boost voltage is 2.38 V/cell 4) if overloaded or load fault not cleared after 10s (defined as
Vout < 200 VDC) it will permanently shut down (power cycle to reset) 5) from revision 9, phased in via pn 241119.825IA |
Solutions
We offer a full - fledged service package for telecom enterprises
in and out of China. This involves a thorough site survey to gain
insights into the customer's requirements, designing a professional
plan that is tailored to their specific needs, offering 24/7
technical support to address any issues, and providing regular
maintenance services to keep the telecommunications infrastructure
in top - notch condition. Our team consists of seasoned
professionals, and we have a global network of trusted partners to
support our clients throughout their telecommunications journey.
FAQ :
1.Q: Can I obtain product samples and get a price quote for them?
A: Yes, sample requests are accepted. The cost of the samples is
based on our standard bulk pricing, and you'll be responsible for
the shipping charges. Once you've selected the samples you'd like
to receive, we'll provide you with a detailed price quote so you
have all the necessary information to make an informed decision.
2.Q: How does your company handle quality - related concerns?
A: With nearly a decade of industry experience, we've established a
reputation for quality and reliability. When a quality issue is
brought to our attention, we'll conduct a thorough and objective
investigation. If it's determined that the problem is due to our
fault, we'll strictly adhere to the terms of our contract. We'll
resolve the issue promptly and effectively, and our dedicated
customer service team will be on hand to support you every step of
the way.
3.Q: How good is the quality of your products?
A: Our products are of exceptional quality. They are 100% original,
brand - new, and come in high - quality packaging. Before shipment,
each product undergoes a meticulous inspection and testing process
to ensure that it performs flawlessly and meets our stringent
quality standards.
4.Q: How long is the warranty for your products?
A: Our products are covered by a 1 - year quality guarantee. During
this period, if you experience any problems related to the quality
of the product, we'll take immediate action. We'll either repair or
replace the product free of charge, depending on the circumstances,
to ensure that you're satisfied with your purchase.
5.Q: What should I do if I receive products that aren't up to par?
A: If you receive any products that don't meet our quality
standards within the warranty period, don't hesitate to contact us.
We'll arrange for the return of the defective items and cover the
return shipping costs. Once we receive the products, we'll quickly
send you replacement items so that you can start using our products
as expected.
