Eltek Micropack Base Batt 2+ LVBD 24/48V Compact controller
242100.915
Micropack system
The Micropack system is convection cooled, designed for less power
hungry applications, but still with system functionality options to
match any requirements. Use as stand alone or in a flexible off the
shelf configurable system.
The Micropack Power System extends your network one step further.
With load ranges typically between 120W and 1000W, and in 12, 24
and 48V options, the system is perfect for a great variety of
applications.
Key features
- Compact and shallow (149 mm deep)
- Din rail mountable
- On-site configurable
- Off the shelf delivery
- Stand-alone option (w/alarm relay)
- Plug-in breakers or bulk output
- Accepts 85 – 300V AC/DC input
- 12, 24-30, 48 Vdc output versions
- Ethernet for remote and local monitoring and control via WEB
Browser
- SNMP protocol with TRAP, SET and GET on Ethernet. Email of TRAP
alarms
- 3 digital programmable relay outputs 3 programmable multipurpose
inputs
Parameters :
|
| Model | Battery dist. | Bulk feed | Bulk feed LVD | Load dist. |
| Part number | 241120.915 | 241120.911 | 241120.912 / .914 | 241120.920 |
| OUTPUT DATA |
System voltage support Unprotected bulk output connections Protected load output connections (plug-able single pole MCB in
negative) Connection to Load dist (241120.920) Unprotected battery output connections (shunt and LVBD in positive) Protected battery output connections (single pole MCB, shunt and
LVBD in negative) Output Protection in rectifiers/converters | -24 – -48 VDC ±12 – ±48 VDC +12 / +24 – +48 VDC -12 – -48 VDC - 1 (Max 10 mm2) 1 (Max 10 mm2) - - - - 4 x 2 - 15 A (Max 4 mm2) • • • • - - 1 2 - (Max 10 mm ) 2 x max 30 A (Max 10 mm2) - - - Blocking OR-ing FET or fuse, Short circuit proof and High
temperature protection |
| OTHER SPECIFICATIONS |
| CAN (1 x RJ45) | CAN (1 x RJ45) 2 x LVD 2 x fuse fail 1 x current shunt 26 mm [1.0”] 110g [0.24 lbs] | CAN (1 x RJ45) 1 x LVD 2x fuse fail 1 x earth fault 66 mm [2.6”] 250 g [0.6 lbs] |
-
73 mm [2.9”] 165 g [0.3 lbs] |
| Control system connection terminals |
|
Extending width |
66 mm [2.6”] |
| Weight | 270 g [0.6 lbs] |
|
|
| Model | Stand alone 2-pos 4-pos DC/DC 1-pos |
| Part number | 241120.900 241120.901 241120.902 241120.905 |
| INPUT DATA |
| Maximum voltage | 300 VAC/DC 72 VDC |
| Maximum current | 2 A 7 A 7 A 15 A |
| Connection, screw terminals max 2.5mm2 | 1 x L/N/PE 1 x DC+/DC-/PE |
| Protection | Individual fuse in Micropack power modules |
| Coding (prevents mixing of output voltages) | Yes, and only rectifiers fit Y, only DC/DC fit |
| OUTPUT DATA |
| Voltage | 12VDC, 24 VDC, 30 VDC & 48 VDC |
| Maximum current | 10 A 20 A 40 A 12 A |
| Connection, screw terminals max 2.5mm2 | 2 x VOUT+ / VOUT– - - 2 x VOUT+ / VOUT– |
| Connection to 241120.91x bases | - • • - |
| Output Protection in rectifiers | Blocking OR-ing FET or fuse, Short circuit proof and High
temperature protection |
| OTHER SPECIFICATIONS |
| Module alarm relay output, max 1mm2 | • - - • |
| CAN connections | - / •(3 pin)1) • (2 wire) • (2 wire) - / •(3 pin)1) ) ) |
| Width | 44 mm [1.7”] 142 mm [5.6”] 231 mm [6.1”] 44 mm [1.7”] |
| Weight | 70 g [0.2 lbs] 160g [0.4 lbs] 250 g [0.6 lbs] 78 g [0.2 lbs] |
|
| Model | DIN Rail Marine Filter |
| Part number | 241120.930 |
| OTHER SPECIFICATIONS |
| Mains rating / connection | 85 - 300 VAC/DC , 0 - 12.5 A / L- N (DC+/-) + PE : 2.5mm2 screw terminals |
| Dimensions / weight | 35 x 99 x 114.5 mm [1.4 x 4.1 x 4.7”] / 328 g [0.72 lbs] |
|
| All models |
| OTHER SPECIFICATIONS |
| Cover material | Plastic V0 rated and aluminium |
| Temperature | Operating: -40 to +65°C (-40 to +149°F), storage: -40 to +85°C (-40
to +185°F) |
| Mounting | 35mm DIN rail |
| Dimensions (H x D) | 89 mm (2U)2) x max. 150mm (incl. DIN rail) mm [3.5 x 5.9 ”] |
| DESIGN STANDARDS |
| Electrical safety | EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC 60950-1:2013
UL 60950-1:2014 |
EMC |
EN 61000-6-1:2019 / -2:2019 / -3:2007/A1:2011/AC:2012 / -4:2019 FCC CFR47 part 15B section 109: 2010, ETSI EN 300 386 v2.1.1: 2016 |
| Mains Harmonics | EN 61000-3-2:2019 |
Environment |
ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class 2.3) EU 2015/863
(RoHS) & 2012/19/EU (WEEE) Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2.
Other operating conditions as per IEC 62040-5-3:2016 clause 4.3,
must be advised |
| Marine compliance (EMC class B) | DNVGL-CG-0339:2015 |
1) CAN connector available on HW rev ≥ 2 2) Allow for minimum 1U below and above to ensure airflow |
Related Products:
Solutions
We provide a complete solution for Telecommunication Companies,
whether they are located in China or operating globally. Our
process starts with a detailed site survey to assess the
feasibility of telecom projects. Based on the survey, we propose
professional and innovative plans that meet the customer's
expectations. Our technical support is proactive and efficient,
resolving issues quickly, and our maintenance services ensure the
long-term performance of telecom systems. With a team of experts
and a global network of trusted partners, we are a reliable and
cost-effective service provider.
FAQ :
1. How do you control the quality level of your products?
A: We take quality control very seriously. All products undergo a
series of tests before shipment, such as usage scenario
simulations, load and full - load testing, and current sharing
verification. This way, we can ensure that the products reaching
you are of excellent quality.
2. Is there a minimum order quantity limit?
A: There's no minimum order quantity. You can order just one item.
But do remember that the price and delivery time may change
depending on how many items you order.
3. Could you introduce your organization?
A: Sure! I'll send you our company's introduction document without
delay. It contains comprehensive information about our company,
helping you get to know us better.
4. What are the main advantages of your company?
A: Our company stands out with its sufficient inventory, which
guarantees continuous supply for future replenishment. We're also
very flexible, offering various solutions to meet different
customer needs.
5. Can I get samples and the corresponding price?
A: Samples can be provided. The price of samples is based on the
large - quantity price, and you'll be responsible for paying the
shipping fee.
